Российский сайт компании
ANTICORIT RP4107 S
Corrosion Protection Oil
ANTICORIT RP 4107 S is a barium-free corrosion preventive which offers cold rolled steel excellent protection in condensation, salt spray and open shed conditions.
ANTICORIT RP 4107 S has good drawing properties and is also easily removed with neutral or alkaline water-based cleaners.
ANTICORIT RP 4107 S is thixotropic and provides optimum film stability on vertical surfaces.
ANTICORIT RP 4107 S meets VW A 001, Mercedes-Benz DBL 6747.15 and Opel B 040 1270 specifications and is correspondingly recommended.
ANTICORIT RP 4107 S protects semi-finished cold rolled steel components during transportation and open sheds storage when good protection and easy removability are priorities. Also the standard corrosion preventive used by the European steel industry.
Application:
ANTICORIT RP 4107 S can be applied by dipping, spraying or rolling.
ANTICORIT RP 4107 S is normally applied electrostatically to cold rolled steel. ANTICORIT RP 4107 S is approved by DUMA and Peabody. When electrostatically spraying or filtering, the temperature should not fall below 40 °C.
As with all thixotropic products, light settling can occur after longer periods of storage.
If sealed in the original container, ANTICORIT RP 4107 S can be stored for min. 5 years at 5-40 °C.
Characteristics:
*) = FUCHS Laboratory procedure
**) = Adam Opel AG test method
***) = Vauxhall Motors Limited, England